Table of Contents
Advertisement
Controls in detail
Memory function*
Storing positions into memory
Adjust the seats ( page 45).
On the driver's side, additionally adjust
the steering wheel ( page 50) and ex-
terior rear view mirrors ( page 51) to
the desired positions.
Press memory button M.
Release memory button M and press
stored position button 1, 2 or 3 within
3 seconds.
All settings are stored to the selected
position.
142
Recalling positions from memory
!
Do not operate the power seats using
memory button M if the seat backrest is in an
excessively reclined position. Doing so could
cause damage to front or rear seats.
Move seat backrest to an upright position first.
Press and hold stored position
button 1, 2 or 3 until the seat, steering
wheel and exterior rear view mirrors
have fully moved to the stored posi-
tions.
i
Releasing the stored position button stops
movement to the stored positions immediately.
Advertisement
Table of Contents
