Table of Contents
Advertisement
Warning!
In order to avoid possible serious burns or
injury, use extreme caution when removing
the rear cover, because the rear exhaust
pipe is extremely hot.
1 Cover
G
Example illustration front bumper
2 Towing eye bolt
Removing cover
i
Cover 1 is secured to the bumper by a
plastic cord.
Press mark on cover 1 as indicated by
the arrow.
Lift off cover 1 to reveal the threaded
hole for towing eye bolt.
Practical hints
Towing the vehicle
Installing towing eye bolt
Take the towing eye bolt and wheel
wrench from the vehicle tool kit
( page 490).
Screw towing eye bolt 2 in clockwise
to its stop and tighten with wheel
wrench.
Removing towing eye bolt
Loosen towing eye bolt 2 counter-
clockwise with wheel wrench.
Unscrew towing eye bolt 2.
Store the towing eye bolt and wheel
wrench back into the vehicle tool kit
( page 490).
Installing cover
Engage cover 1 at top and press at
bottom.
541
Advertisement
Table of Contents
