Table of Contents
Advertisement
Reactivating
Press button > ( page 230).
The indicator lamp on the button
comes on.
In display e ( page 230), you will see
the > symbol followed by
MODE
. The
MODE
display is cleared and
the indicator lamp on button >
goes out after approximately
3 seconds.
The rear automatic climate control
switches on.
Setting the temperature
Press button > ( page 230).
The indicator lamp on the button
comes on.
In display e ( page 230), you will see
the > symbol followed by
ON
and
Set the desired temperature for the
rear passenger compartment using
temperature control 3 ( page 242).
After approximately 3 seconds after
the last adjustment, the display switch-
es back to its standard display and the
indicator lamp on button > goes
out.
i
You can also press the > button once
more to switch back to the standard display.
3-zone automatic climate control*
Adjusting air distribution
Use the air distribution controls 5 or 6
to adjust the air distribution for the rear
passenger compartment.
The symbols on the controls represent the
following functions:
MODE
.
Symbol Function
Z
Directs air to the center air
vents
Y
Directs air to the footwells and
the side air vents
Adjusting manually
Press the desired air distribution con-
trol.
The indicator lamp on button U
goes out.
Controls in detail
243
Advertisement
Table of Contents
