Table of Contents
Advertisement
Returning seats to their original position
Warning!
Make sure all seats are properly locked in
position before driving off. Do not drive with
seats not properly locked.
Never ride in a moving vehicle with the seat
not properly locked as this can be danger-
ous. The seat could move forward and the
seat backrest could fold. You could slide un-
der the seat belt during braking, vehicle ma-
neuvers, or in an accident. If you slide under
it, the belt would apply force at the abdomen
or neck. That could cause serious or even fa-
tal injuries.
The seat backrest and seat belt provide the
best restraint when the wearer is in a nearly
upright position and the belt is properly po-
sitioned on the body.
Step 1:
Return third-row seats to its original
G
position ( page 308).
Step 2:
1 Seat backrest
2 Lever
Pull and hold lever 2 in direction of
arrow at resistance point.
Fold seat backrest 1 rearward until it
engages.
Check for secure locking by pushing
and pulling on seat backrest 1.
Controls in detail
3 Seat cushion
Fold seat cushion 3 rearward until it
locks into position.
Loading
309
Advertisement
Table of Contents
