Table of Contents
Advertisement
Replacing bulbs
1 Bulb socket
2 Clamp
Press and hold clamps 2.
Pull bulb socket 1 outwards.
Bulb socket
1 Backup lamp
2 Tail lamp, brake lamp, parking and
standing lamp
3 Tail lamp, brake lamp, parking and
standing lamp, side marker lamp
4 Turn signal lamp
5 Rear fog lamp (driver's side only)
Depending on which bulb needs to be
replaced, turn the respective
bulb 1 - 5 counterclockwise.
Practical hints
Replacing bulbs
Pull the bulb out of the housing.
Insert the new bulb into the bulb sock-
et.
Turn the bulb in the bulb socket clock-
wise carefully.
Insert the bulb socket into the rear
lamp.
Align bulb socket and press bulb sock-
et into rear lamp until it audibly engag-
es.
Make sure bulb socket is attached
properly.
Close the respective cover in the cargo
compartment.
Close the tailgate ( page 123).
513
Advertisement
Table of Contents
