Table of Contents
Advertisement
Controls in detail
Automatic transmission
Kickdown
Use kickdown when you want maximum
acceleration.
Press the accelerator past the point of
resistance.
Depending on the engine speed the
transmission shifts into a lower gear.
Ease on the accelerator when you have
reached the desired speed.
The transmission shifts up again.
Stopping
When you stop briefly, e.g. at traffic lights:
Leave the transmission in gear.
Hold the vehicle with the brake.
When you stop for a longer period of time
with the engine idling and/or on a hill:
Set the parking brake.
Shift into park position P.
196
Maneuvering
When you maneuver in tight areas,
e.g. when pulling into a parking space:
Control the vehicle speed by gradually
releasing the brakes.
Accelerate gently.
Never abruptly step on the accelerator.
Rocking the vehicle
Rocking the vehicle by shifting between
drive position D and reverse gear R can
help free a vehicle stuck in mud or snow.
The engine control system of this vehicle
electronically limits shifting between
drive position D and reverse gear R to
very low speeds, i.e. approximately
5 mph (9 km/h). To shift between drive
position D and reverse gear R, move the
gear selector lever past the resistance
point up or down.
Working on the vehicle
Warning!
When working on the vehicle, set the
parking brake and shift to park position P.
Otherwise the vehicle could roll away.
Hill start assist system
Warning!
The hill start assist system is not designed
to function as a parking brake and does not
prevent the vehicle from moving when
parked on an incline.
Always set the parking brake in addition to
P
shifting to park position
.
G
G
Advertisement
Table of Contents
