Table of Contents
Advertisement
Practical hints
Replacing bulbs
Side marker lamp bulb
Turn bulb socket 5 ( page 507)
counterclockwise.
Pull bulb socket 5 out of the
headlamp housing.
Pull the side marker bulb out of bulb
socket 5.
Insert the new side marker bulb into
bulb socket 5.
Insert bulb socket 5 into the
headlamp housing.
Turn bulb socket 5 clockwise until it
engages.
510
Front fog lamp bulbs
!
If not done carefully and properly, damage
to the bumper can result. We therefore recom-
mend that you have this work carried out by an
authorized Mercedes-Benz Light Truck Center.
Removing front fog lamp cover:
1 Cover
2 Front fog lamp or corner-illuminating
front fog lamp*
Insert a suitable object (e.g. screwdriv-
er) at point indicated by the arrow and
pry out cover 1.
Cover 1 is released.
Swing cover 1 outwards and take it
off.
You can now access the front fog lamp.
3 Retaining screws
Turn retaining screws 3 counterclock-
wise.
Remove front fog lamp 2 out of the
bumper.
Pull electrical connector off.
Advertisement
Table of Contents
