Setting Switching Times (Time Program U) - Viessmann vitocal 300-g Operating Instructions Manual

Setting a permanent room temperature
Heating circ. 1
Room t standard
Room t reduced
Switching times HC
Heating curve level
Heat. curve slope
-1.0 +1.0
Press the following keys:
1. "Device settings"
2. "Programming"
3. "Heating circ. 1"
or
"Heating circ. 2", "Heating circ. 3"
(if installed)
4. y/x for standard or reduced
room temperature
"Room t standard" or
"Room t reduced"

Setting switching times (time program u)

For central heating, setting switching times effects a changeover between the oper-
ating modes "STANDBY" (see page 19), "REDUCED", "STANDARD", and "FIXED
VALUE".
[°C]
5. !/1 for the required temper-
: 20.0
: 16.0
:
T
:
0.0
:
0.6
Back
6. "BACK"
Adjusting the room temperature
(cont.)
ature.
ª restores the selec-
ted temperature to its
delivered condition.
Note
The reduced room tem-
perature cannot be set
higher than the standard
room temperature.
The standard room tem-
perature cannot be set
lower than the reduced
room temperature.
to confirm and exit the
menu
23