Scanning Options Scanning Temperatures - Viessmann vitocal 300-g Operating Instructions Manual

Scanning options
Scanning temperatures
You can scan temperatures at the internally and externally connected temperature
sensors.
Sensor temps.
Outside
Flow primary
Primary off
Flow secondary
Secondary return
Flow system
Buffer cylinder bottom
DHW cylinder top
Press the following keys:
1. "Information"
Scanning switching times
You can scan but not change the heating circuit switching times for different function
groups.
Note
Should the switching times be changed,
proceed as described on
page 23, 30, 31 or 37.
Possible scans for the following switch-
ing times (if components installed):
■ "DHWcirServ"
(e.g. DHW circulation pump)
■ "Switching times DHW"
(DHW)
■ "Switch t buffer cyl."
(Heating water buffer cylinder)
■ "Switching times HC"
(also for heating circuits 2 and 3 if
installed)
44
[°C]
2. "Sensor temps"
:
-10.2
:
5.9
3. y/x for the temperature to be
:
35.3
:
28.9
: 45.2
:
35.7
4. "BACK"
:
50.0
:
50.0
Note
BACK
If the sensors are faulty, they will be dis-
played as "– – –". A temperature display
is not possible in this case.
Switching times HC1
06:00-06:14
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
SUNDAY
Press the following keys:
1. "Information"
2. "Switching times"
scanned
to exit the menu
0 3 6 9 12 15 18 21 24
3
3
3
3
3
3
3
>>
BACK