Restoring Values Individually - Viessmann vitocal 300-g Operating Instructions Manual

Restoring the delivered condition ("Reset")

Restoring values individually

In the menus, any selected value can be
reset to its delivered condition with
ª.
Restoring all values simultaneously
Note
A reset at the user level will only restore
the settings at the user level to the deliv-
ered condition. Contact your heating
engineer regarding resetting all param-
eters.
Parameter groups at the user level:
■ "System definition"
■ "DHW" (if installed)
■ "Electric heater" (if installed)
■ "Buffer cylinder" (if installed)
■ "Heating circ. 1"
■ "Heating circ. 2" (if installed)
■ "Heating circ. 3" (if installed)
■ "Cooling" (if installed)
Reset
¼
System definition:
Restore
factory settings?
ALL
YES
Press the following keys:
1. "Reset" "System definition"
appears
2. "ALL"
3. "YES"
4. "NO"
Back
NO
Further adjustments
(cont.)
if you want to simultane-
ously reset the parameters
of all function groups
including time programs.
Note
There is no further security
scan
or
if you want to reset the
parameters of the function
group (e.g. "System defi-
nition"), the scan for the
next function group (e.g.
"DHW") appears
or
if you do not want to reset
the parameters of the func-
tion group (e.g. "System
definition"), the next func-
tion group (e.g. "DHW")
appears.
43