Western Digital My Cloud Mirror User Manual page 106

occur at times when the likelihood of users accessing the cloud are
minimal.
enable Auto Update, you are asked to manually reboot your
Note: If you
system when the update is completed.
Updating Firmware Automatically
1. To enable Auto Update, click the toggle button
2. In the Update Schedule field, from the drop-down lists, specify the frequency (e.g., daily)
and the time at which the device should look for an update on the WD website.
3. Click Save.
Once saved, your device will check for firmware updates at the specified time and day. If
an update is available, it will automatically install and prompt you for a reboot.
Available Updates
You can check for available updates at any time in the Available Updates area. This area also
displays the current version of the firmware and indicates when the last firmware update was
made.
Checking for Updates
1. In the New Firmware field, click Check for Updates.
2. Review the Update Firmware screen and click OK.
 If an update is available, click Install and Reboot.
Manual Update
Follow this procedure to perform a manual update.
Note: Ensure that you've downloaded the firmware file you need to install on
your device from the WD Tech Support Downloads page at
http://support.wd.com/product/download.asp.
Manually Installing an Update
MY CLOUD MIRROR (GEN 2) CLOUD STORAGE
USER MANUAL
CONFIGURING SETTINGS
to ON.
101