Table of Contents
Advertisement
1. Refer to you router user guide and log on to your router's DHCP LAN/Device Client Table
to obtain the IP address for your device.
2. Type device IP address in a browser window. The Safe Mode UI appears.
3. Browse to the location where you saved the downloaded firmware.
4. Click Apply to load the firmware.
5. On the dialog box, click OK. The device reboots.
6. Once your reboot is completed, ensure that you clear your browser's cache. Check your
browser's help to determine the best way to clear the cache.
7. Once your device has completed the reboot, we recommend that you do a system
restore. See
"Restoring your System" on page
Appendix G: Technical Specifications
Ethernet
Internal hard drives
Supported protocols
I/O ports
Data transfer rate
MY CLOUD MIRROR (GEN 2) CLOUD STORAGE
USER MANUAL
93.
High performance (100/1000) Gigabit Ethernet connection
2 WD Red 3.5-inch SATA hard drives
CIFS/SMB, NFS, FTP, AFP
Gigabit Ethernet (RJ-45) port
USB 3.0 up to 5 Gb/s
*A USB 3.0 host and USB 3.0 certified cable are required to
obtain USB 3.0 performance.
129
Hide quick links:
Advertisement
Table of Contents
