Western Digital My Cloud Mirror User Manual page 91

FTP Access
AFP Service
NFS Service
WebDAV Service
MY CLOUD MIRROR (GEN 2) CLOUD STORAGE
USER MANUAL
File Transfer Protocol enables the transfer of data from one
computer to another through a network. FTP is disabled by default.
1. To enable FTP Access, click the toggle button to on.
2. Click .
Configure
3. On the FTP Settings screen, enter the following information:
• Maximum Users: From the drop-down menu, select the
maximum number of users you'd like to have FTP access.
• Idle Time: Enter the amount of time, in minutes, you'd like the FTP
to be idle before it times out.
• Port: Enter the port to be used for FTP access.
• Flow Control: Select either Unlimited or Customize. If you
select Customize, enter a Flow Control value.
4. Click .
Next
5. In the
Passive Mode
you select Customize, enter Passive Mode values.
6. Select the check box if you'd like to report external IP in PASV
mode and click
Next
7. Enter the following information:
• Client Language: Select the client language from the drop-down
menu.
• SSL/TLS: Select this check box if you'd like to allow only SSL/TLS
connections.
• FXP: To enable FXP, click the toggle button
8. Click .
Next
9. Enter all IP addresses that you'd like to block from FTP access
and select either
Permanent
menu. Click to save your entries.
Save
10. Click .
Finish
Apple File Protocol. AFP Service is automatically enabled if you are
set up for Time Machine backups.
• To enable/disable AFP Service, click the toggle button
WARNING! Mounting or ejecting a USB drive while performing
an NFS or AFP file transfer will interrupt the file
transfer process.
Network File System. Select this option to enable NFS Service for
your network.
• To enable/disable NFS Service, click the toggle button
WARNING! Mounting or ejecting a USB drive while performing
an NFS or AFP file transfer will interrupt the file
transfer process.
Web Distributed Authoring and Versioning (WebDAV). Select this
option to enable WebDAV service for your network.
• To enable/disable WebDAV Service, click the toggle button
Note: In order to connect to the WebDAV service, use the
following IP address: http://<server ip address>:8080/
Public
CONFIGURING SETTINGS
field, select either
Default
.
or from the drop-down
Temporary
or . If
Customize
to ON.
.
.
.
86