Port Forwarding - Western Digital My Cloud Mirror User Manual

Remote Server
The Remote Server section of the Network screen allows you to enable your
My Cloud Mirror device to act as a remote server, allowing you to back up shares from
another My Cloud Mirror on the local LAN or WAN.
Note: To see your My Cloud Mirror device over the Internet, ensure that you've
added port forwarding rules for both SSH and Remote Backup services
("Port Forwarding" on page
To enable Remote Server:
1. Click the toggle button
2. Click Configure. The Remote Server screen displays:
3. In the Password field, enter a password to be used to access remote backups for this
device to a remote server.
4. Click Save.
5. Review the SSH information and click the I accept check box.
6. Create a password for SSH login and then click OK.

Port Forwarding

The Port Forwarding section of the Network screen allows you to manage your connections
to particular services by assigning default or custom port numbers.
For additional information on Port Forwarding, see Knowledge Base Answer ID 10649.
Adding Port Forwarding Services
The Port Forwarding section of the Network screen allows you to manage your connections
to particular services by assigning default or custom port numbers.
1. Click Add to add port forwarding service(s) to your My Cloud Mirror device.
2. On the Port Forwarding Settings screen, click either Select the default service scan
or the Customize a port forwarding service and click Next.
 If you selected Select the default service scan: Select the default service scan
you'd like to use for port forwarding and click Finish.
 If you selected Customize a port forwarding service, complete the following
fields, and click Finish.
Service: Enter a service for your port forwarding.
Protocol: Select a protocol from the drop-down menu.
MY CLOUD MIRROR (GEN 2) CLOUD STORAGE
USER MANUAL
89).
to ON.
CONFIGURING SETTINGS
89