OVERVIEW
There are two methods of connecting the AppCam Pan/Tilt cameras to your
mobile device. One method is wireless and the other method has the camera
connected directly to the router using the provided Ethernet cable.
The add camera procedures themselves are identical. In the setup procedures
that follow, the wired connection instructions are noted where applicable.
Use these same procedures to add additional cameras to your network.
PREREQUISITES
Your router must support WEP/WPA/WPA2 security and it must be turned
•
on.
You must have an available WiFi-enabled mobile device (iOS smartphone/
•
tablet).
The AppCam Pan/Tilt and your mobile device must connect to the same Wi-
•
Fi router for setup.
STEP 1 - SET UP CAMERA AND SMARTPHONE/TABLET
1. Download the Uniden® AppCam™ app from the
Apple App Store onto your device.
2. Connect the antenna to the camera.
8
NETWORK SETUP AND
CAMERA INSTALLATION