Initial Camera Setup - Uniden App Cam Floodlight Quick Start Manual

To set up your new App Cam Floodlight, please make sure it's
successfully installed, and that the status LED on the camera is flashing
red.
This flashing red status LED means that your Camera Floodlight is ready
to be paired to your My Uniden App
Prerequisites
• You must have an available Wi-Fi-enabled Smartphone (Android or
iOS smartphone).
• The App Cam Floodlight and your mobile device must within the same
Wi-Fi network range for initial setup (ideally within 3m from the router).
• Wi-Fi router connection is 2.4GHz and password if any.
1. Search and download the free My Uniden App from the App Store for
iOS devices or Play Store for Android devices. You will need to create
an account specifically for the My Uniden app. If you already have a My
Uniden app account, you will log into the My Uniden App using your My
Uniden account email and password. You can skip to Step 6.
2. When the LED indicator starts flashing red, the camera is ready to
be paired with your Wi-Fi network. If the LED indicator is not red and
flashing quickly, press and hold the reset button, wait for the LED
indicator to flashing red.
* Please note that app screenshots are for reference only� User Interface for iPhone and
Android Phones might differ in terms of icons layout and functionality and may change
without notice�
As the My Uniden App is constantly under development to enrich user experience,
the icons/screens shown in this QSG may vary slightly from the actual app.
10

INITIAL CAMERA SETUP

Press and hold the Reset button (behind the
camera) for 5 seconds to reset the camera