Step 4 - Set Time Zone/Daylight Savings Time; Step 5 - Install Cameras - Uniden APPCAM PAN/TILT User Manual

STEP 4 - SET TIME ZONE/DAYLIGHT SAVINGS TIME

It is important to set the correct time zone and daylight savings time indication
on your camera to ensure correct date/time stamp on the video files.
1. Access the Advanced Settings list (see Connect Camera to Internet, described
previously.
2. From the Advancd Settings list, scroll to Time Zone.
3. Select your time zone. The most commonly used time zones are:
GMT-05:00 - Eastern Standard
ͳ
GMT-06:00 - Central Standard
ͳ
GMT-07:00 - Mountain Standard
ͳ
GMT-08:00 - Pacific Standard
ͳ
GMT-09:00 - Yukon Standard
ͳ
GMT-10:00 - Alaska-Hawaii Standard
ͳ
4. Set the Daylight Savings Time indicator.
5. Tap Back, and exit the Advanced Settings list.

STEP 5 - INSTALL CAMERAS

Consider the following when installing cameras:
Clear line of sight video transmission distance is up to 500 ft.
•
Walls, especially brick and concrete, shorten the transmission distance.
—
Placement next to windows allows better transmission.
—
Avoid having a direct light source in the view of the camera, including street
•
lights, ceiling or floor lamps, spotlights in the driveway, etc.
11