Uniden APPCAM PAN/TILT User Manual page 12

Table of Contents

Advertisement

The camera is equipped with built-in infrared LEDs so you can use night
vision for 24-hour surveillance. The LEDs will automatically activate at night
and the picture viewed will turn to black and white. The night viewing range
is up to 25 ft. Avoid pointing the camera lens directly at clear glass; the night
vision LEDs will cause a blurred image.
Optimized motion detection range is 6 - 18 feet for the camera. The farther
away an object is, the less accurate the motion detection.
If you leave your camera wirelessly connected to the router, your picture
quality will be very good. However, you can leave the camera connected
to the router for the highest quality images. If you wish to do so, install the
camera within reach of the router.
1. Hold the mounting plate where you want to mount it and mark the
location of the screw holes.
2. Use the included screws and anchors to attach the mounting plate to the
wall.
3. Use the enclosed screws to screw the camera to the bracket.
12

Advertisement

Table of Contents
loading

Table of Contents