Adding, Changing And Deleting Access Codes; Enrolling And Deleting Proximity Tags - DSC Neo HS2016 User Manual

Chapter 7
To Open the Access Codes Menu
1. Press [*][5]
OR
press [*] and use the scroll keys to navigate to Access Codes and press [*].
2. Enter [Master or supervisor code].
3. Enter [2 digit user #]
OR
scroll through the list of users and press [*]. On an LED keypad the user number
will begin flashing.
4. To go back to the Ready state press [#].

7.1.1 Adding, Changing and Deleting Access Codes

Each configured user is assigned a number from 01-95. Access codes cannot be duplicated.
To Add or Change User Access Codes
1. From the desired user press [*] or [1].
2. Enter a new 4 or 6 digit access code. After entering a new code you will be auto-
matically returned to the previous menu, and on an LCD display the flag is changed
to P from -. On an ICN or LED keypad the programmed user will have their digits
displayed. If a duplicate code is entered the error tone will sound. After the code is
programmed, the keypad returns to the previous LCD display.
To Delete a User Access Code
1. From the desired user press [*] or [1].
2. Press [*]. The code is deleted, and you are returned to the previous screen. The flag
is changed to - from P. On an ICN or LED keypad the programmed user's digits will
cease being displayed. After the code is programmed, the keypad returns to the pre-
vious LCD display.
Note: Any proximity tags associated with deleted user codes will need to be re-enrolled.

7.1.2 Enrolling and Deleting Proximity Tags

When enrolling or deleting proximity tags for a user, the system provides a choice of option depending on if tag is already enrolled
or not. For more information on see: "Using Proximity Tags".
To Enroll a Proximity Tag
1. From the desired user press [2] or scroll to Prox Tag and press [*].
2. If no tag is enrolled for this user you will be asked to present the tag to the
reader.
If the card successfully enrolls the blue LED bar flashes.
l
If the tag is invalid the following message is displayed.
l
If the tag already is enrolled with another user the following message is dis-
l
played.
To Delete a Proximity Tag
1. From the desired user press or scroll to Prox Tag and press [*].
2. If a tag is enrolled for this user you will be asked if you would like to delete the Tag.
Press [*] to delete the tag.
- 23 -
LCD Display
Press (*) for <>
Access Codes
Present Tag or
Enter Code
Press (*) for <>
{User Label}
LCD Display
Press (*) for <>
Access Code
Enter New Code
AAAA
LCD Display
Press (*) for <>
Access Code
Enter New Code
030516
LCD Display
Press (*) for <>
Prox Tag
Present Tag or
Press # to Exit
Tag Enrolled
Successfully
Invalid Tag
Not Enrolled
Duplicate Tag
Not Enrolled
LCD Display
Press (*) for <>
Prox Tag
* To Delete Tag
Press # to Exit
Tag Deleted
Successfully