Table of Contents
Advertisement
Chapter 7
To Open the Access Codes Menu
1.
Press [*][5]
OR
press [*] and use the scroll keys to navigate to Access Codes and press [*].
2.
Enter [Master or supervisor code].
3.
Enter [User #]
OR
scroll through the list of users and press [*]. On an LED keypad the user number
will begin flashing.
4.
To go back to the Ready state press [#].
7.1.1 Adding, Changing and Deleting Access Codes
Each configured user is assigned a number as follows:
01-48 for HS2016/HS2016-4
l
01-72 for HS2032
l
01-95 for HS2064/HS2128
l
001-500 for HS2064 E
l
0001-1000 for HS2128 E
l
Access codes cannot be duplicated.
To Add or Change User Access Codes
1.
From the desired user press [*] or [1].
2.
Enter a new 4, 6, or 8-digit access code. After entering a new code you will be auto-
matically returned to the previous menu, and on an LCD display the flag is changed
to P from -. On an ICN or LED keypad the programmed user will have their digits
displayed. If a duplicate code is entered the error tone will sound. After the code is
programmed, the keypad returns to the previous LCD display.
To Delete a User Access Code
1.
From the desired user press [*] or [1].
2.
Press [*]. The code is deleted, and you are returned to the previous screen. The flag
is changed to - from P. On an ICN or LED keypad the programmed user's digits will
cease being displayed. After the code is programmed, the keypad returns to the pre-
vious LCD display.
Note: Any proximity tags associated with deleted user codes will need to be re-enrolled.
7.1.2 Enrolling and Deleting Proximity Tags
When enrolling or deleting proximity tags for a user, the system provides a choice of option depending on if tag is already enrolled
or not. For more information on see: "Using Proximity Tags".
To Enroll a Proximity Tag
1.
From the desired user press [2] or scroll to Prox Tag and press [*].
2.
If no tag is enrolled for this user you will be asked to present the tag to the
reader.
If the card successfully enrolls the blue LED bar flashes.
l
If the tag is invalid the following message is displayed.
l
If the tag already is enrolled with another user the following message is dis-
l
played.
To Delete a Proximity Tag
1.
From the desired user press or scroll to Prox Tag and press [*].
- 23 -
LCD Display
Press (*) for <>
Access Codes
Present Tag or
Enter Code
Press (*) for <>
{User Label}
LCD Display
Press (*) for <>
Access Code
Enter New Code
AAAA
LCD Display
Press (*) for <>
Access Code
Enter New Code
030516
LCD Display
Press (*) for <>
Prox Tag
Present Tag or
Press # to Exit
Tag Enrolled
Successfully
Invalid Tag
Not Enrolled
Duplicate Tag
Not Enrolled
LCD Display
Press (*) for <>
Prox Tag
Advertisement
Table of Contents
