Vca Detection - HIKVISION DS-8600NI-8 Quick Operation Manual

Quick Operation Guide of Network Video Recorder

VCA Detection

Purpose:
The NVR supports the VCA detection alarm (face detection, vehicle detection, line crossing detection and
intrusion detection, region entrance detection, region exiting detection, loitering detection, people gathering
detection, fast moving detection, parking detection, unattended baggage detection, object removal detection,
audio loss exception detection, sudden change of sound intensity detection, and defocus detection) sent by IP
camera. The VCA detection must be enabled and configured on the IP camera settings interface first.
Steps:
1. Enter VCA Alarm interface of Camera Management and select a camera you want to detect VCA alarm.
Menu > Camera > VCA
2. Enable the VCA detection and configure the rule settings. Please refer to the User Manual for detailed
instructions.
VCA detection is only supported by DS-7700NI/E4(P) and DS-8600NI-E8. For detailed steps, please refer to
the User Manual for detailed instructions to set the VCA rules.
37