Table of Contents
Advertisement
Quick Operation Guide of Network Video Recorder
Recording
Before you start:
Make sure that the HDD has already been installed. If not, please install a HDD and initialize it. You can refer
to the user manual for detailed information.
Purpose:
Two kinds of record types are introduced in the following section, including Instant Record and All-day
Record. And for other record types, you may refer to the user manual for detailed information.
After rebooting all the manual records enabled are canceled.
Instant Recording
On the live view window of each channel, there is a quick setting toolbar which shows on the bottom of the
window when you click on it.
Click the
icon to enable the record, and the icon turns to
then the icon turns to
All-day Recording
Steps:
1.
On the live view window, right lick the window and move the cursor to the Start Recording option,
and select Continuous Record or Motion Detection Record on your demand.
2.
And click the Yes button in the popup Attention message box to confirm the settings.
Then all the channels will start to record in the selected mode.
Playback
Play back the record files of a specific channel in the live view menu. Channel switch is supported.
Option 1:
Choose a channel under live view using the mouse and click the
Only record files recorded during the past five minutes on this channel will be played back.
.
34
. And click
icon to disable the record,
button in the shortcut operation menu.
Hide quick links:
Advertisement
Table of Contents
