Fuse Replacement - Elation Design Wash 575E User Instructions

Design Wash 575E™
11.

FUSE REPLACEMENT

Caution: Always replace with the exact same type fuse, unless otherwise specified by an authorized
Elation® service technician. Replacing with anything other than the specified part can damage your unit
and will void your manufactures warranty.
Warning: If you continue to blow fuses, STOP using the fixture. Contact customer support for further
instructions, you may have to return the unit for servicing. Continuing to use the unit may cause serious
damage.
Fuse Replacement: Locate and remove the unit's power cord from the main power supply. Once the
cord has been removed located the fuse holders located on the side panel near the power input
connection. Using a flat-head screwdriver unlock the fuse holder from its' housing by turning the holder in
a counter-clockwise direction. Once the fuse holder has been unlocked, pull back on the fuse holder to
expose the fuse. Gently pull out the bad fuse and discard of it properly and replace it with an exact match.
Reassemble in reverse order.
©Elation Professional® 36 Design Wash 575E™