Elation Design Wash 575E User Instructions page 30

control head movement, the color wheel, the shutter (strobe), and all other DMX traits.
A DMX controller allows you to create unique programs tailored to your individual
needs. The Design Wash 575E™ uses 24 DMX channels. See page 36 for detailed
description of the DMX traits. To control your fixture in DMX mode, follow the set-up
procedures on pages 16-18 as well as the set-up specifications that are included with
your DMX controller. Use the controller's faders to control the various DMX fixture traits.
This will allow you to create your own programs.
9.1.1 Follow the instruction on page 24 to set the DMX address.
9.1.1 Be sure to use a terminator on the last fixture, especially for longer cable
runs (more than a 100 feet).
9.1.1 For help operating in DMX mode consult the manual included with your DMX
controller.
9.2 Stand-Alone Operation (Sound Active): This mode allows a single fixture to run to
the beat of the music. Only use this mode when running a single fixture, or when running
several fixtures as individuals.
9.2.1 Mount your fixture in a secure and stable manner.
9.2.1 Access the main menu and select the AUDI function, this will give you access to
the audio submenu. See page 16 for the menu breakdown.
9.2.1 In the audio submenu choose the audio chase speed, fast or slow. Slow (ASLW)
will trigger the chase sequence to every two beats, while fast (AFST) will trigger
the chase impulse every beat. See page 16 for more details.
9.2.1 Be sure the Master (MSTR) function is switched "ON," and the SVPT function is
switched "OFF."
9.2.1 Choose your room size. The size function allows you to choose a the
©Elation Professional® 30
Design Wash 575E™
Design Wash 575E™