Elation Design Wash 575E User Instructions page 24

Hide thumbs Also See for Design Wash 575E:

Table of Contents

• Turn the LCD controls to select "ON" if you wish to strike the lamp or "OFF" in order

to switch it off.

• Press the LCD controls to confirm.

• Press the Mode/Esc-button in order to return to the main menu.

2. Lamp on by Power

With this function you can select if the lamp will be switched on when switching the

power on. Select "ON" by turning the LCD controls if you wish to enable this function or

"OFF" if you don't.

3. Lamp on via external DMX controller

With this function you can select if you can switch the lamp on via an external controller.

Select "ON" by turning the LCD controls if you wish to enable this function or "OFF" if

you don't.

4. Lamp off via external DMX controller

With this function you can select if you can switch the lamp off via an external controller.

Select "ON" by turning the LCD controls if you wish to enable this function or "OFF" if

you don't.

5. Lamp Off if no DMX

With this function you can select to switch off the lamp off automatically if there is no

DMX signal). Select "ON" by turning the LCD controls if you wish to enable this function

or "OFF" if you don't.

6. Lamp on at temp.

With this function you can set the inside temperature from which the projector will

restrike the lamp after automatic lamp shut off.

7. Lamp off at temp.

With this function you can set the inside temperature at which the projector will

automatically switch the lamp off. Turn the LCD controls to select the maximum inside

Design Wash 575E™

Table of Contents