Elation Design Wash 575E User Instructions page 27

to more closely match similar fixtures from different vendors, thus allowing
the user easier functionality when programming. There are four different
mode variations.
I. Mic Sensitivity – This function make the internal microphone more or less
sensitive to sound. This function only works in conjunction with the sound
active modes. The default setting is 70% and setting range from 0 % to 99
%.
2. Service Setting
A. Service Password – You must enter this service password, the functions
"Fan Voltage" can be activated and operated. The service password is 050.
B. Fan Voltage– With this function you can select the Fan voltage from either
high or low. The default function is low.
3. Fans Control - This function is used to change the functionality of the internal cooling
fans. The available selections are: 1) "AUTO" – The fans will automatically switch
between low and high speeds depending on the internal operating temperature. 2)
"HIGH" – The fans will run in high-speed mode regardless of operating temperature. 3)
"LOW" – The fans will remain in low speeds regardless of internal operating
temperature.
4. Display Setting – With this function, you can display the shutoff time.
5. Temperature C/F – This function changes the temperature unit readout from either the
temperature Celsius or Fahrenheit.
6. Initial effect - With this function, you can adjust with which value the respective
channels will start.
7. Restore factory settings - With this function you can restore the factory settings of the
device. All settings will be set back to the default values (shaded). Any edited scenes will
be lost.
©Elation Professional® 27
Design Wash 575E™
Design Wash 575E™