Lens Replacement - Elation Design LED 108IP User Instructions

DESIGN LED 108IP™

11. LENS REPLACEMENT

The Design LED 108IP comes with a removable front cover that allows lens assembly to be
changed out to achieve different beam angles.
Lens cover is held in place by two ¼ turn locking fasteners. To remove the cover; 1) Turn the
locking fasteners in a counter-clockwise direction. 2) Once the fasteners are loose lift the
cover the outer protective cable (see first illustration below). 3) Locate the 8 securing screws
on the inner cover and remove them. 4) Remove the inner cover to access the lenses (see
second illustration below). Once the lenses are changed reassemble in reverse order.
©Elation Professional, Los Angeles Ca. 26 www.ElationLighting.com