Table of Contents
Advertisement
SUPERSERVER 1028R-WTNR(T)F Series User's Manual
•
Put the serverboard, add-on cards and peripherals back into their antistatic
bags when not in use.
•
For grounding purposes, make sure your computer chassis provides excellent
conductivity between the power supply, the case, the mounting fasteners and
the serverboard.
6-2
Removing Power from the System
Before performing setup or maintenance tasks, use the following procedure to
ensure that power has been removed from the system.
1. Use the operating system to power down the system, following the on-screen
prompts.
2. After the system has completely shut-down, carefully grasp the head of the
power cord and gently pull it out of the back of the power supply. Remove the
cords from both power supply modules.
3. Disconnect the cords from the power strip or wall outlet.
6-2
Advertisement
Table of Contents
