Table of Contents
Advertisement
SUPERSERVER 1028R-WTNR(T)F Series User's Manual
5. Place the new fan into the vacant space in the housing while making sure the
arrows on the top of the fan (indicating air direction) point in the same direction
as the arrows on the other fans.
6. Reconnect the fan wires to the same chassis fan header as the previous fan.
7. Power up the system and check that the fan is working properly before replacing
the chassis cover.
Checking the Server Airflow
•
Make sure there are no objects to obstruct airflow in and out of the server.
•
Make sure no cables or foreign objects obstruct airflow through the chassis. Pull
all excess cabling out of the airflow path or use shorter cables.
The control panel LEDs display alerts about the system heat status. See "Chapter
3: System Interface" for details.
6-8
Advertisement
Table of Contents
