Feeder Trays - Xerox DocuPrint 96 IPS System Overview Manual

PRINTERS

Feeder trays

4-8
The 4635 IPS and the 180 IPS may have up to six feeder trays: the
two processor trays and two to four high-capacity trays. The 96 IPS
can have up to four input trays: the two processor trays and one to
two high-capacity feeder trays.
The total input and output page quantities for each high-capacity
feeder tray are shown in table 4-1.
Table 4-1. Total input and output capacity for printer with
each added feeder/stacker module
Configuration — 2
processor feeder
trays plus:
First (inverter) F/S 4300
Second F/S 6900
Third F/S 9500
Fourth F/S 12100
•
The 4635 and 180 IPS can feed papers as small as 7 inches /
178 mm in width if the optional 7 by 10-inch enablement kit is
installed. The 7 by 10-inch paper option is not available on the
96 IPS.
•
Paper that is 17 inches / 432 mm long can be fed only short
edge first.
An elevator moves the tray up or down when it is in use. The HCF
trays have Paper Level switches which detect the position of the
elevator to determine the fullness of the tray. Paper Size switches
detect the size of the paper loaded in the trays.
XEROX DOCUPRINT 96/4635/180 IPS SYSTEM OVERVIEW GUIDE
Total input Total output
(pages)
2500
5000
7500
10000
(pages)