Options Enabling Third-Party Feeding And Finishing - Xerox DocuPrint 96 IPS System Overview Manual

PRINTERS

Options enabling third-party feeding and finishing

Programmable bypass transport
Input Enablement kit
4-14
The Input Enablement and bypass transport devices are offered as
optional components. These options allow you to customize your
printer for increased efficiency and specialized applications, such as
roll feed and finishing devices.
The ability to add a third-party finisher to your 96/4635/180 IPS is
made possible by the programmable bypass transport option.
Finishers increase your production capabilities by providing a wide
variety of finishing choices (for example, slitting, booklet making,
binding, and so forth).
Connected to the printer's last feeder/stacker module, the
programmable bypass transport allows finishers to interface directly
with your 96/4635/180 IPS. It accepts all paper stocks within the 96/
4635/180 range and accommodates simplex and duplex printing.
The programmable bypass transport meets the Xerox Document
Feeding and Finishing Architecture (DFA) specifications.
Adding a third-party feeder to your 96, 4635, or 180 IPS is made
possible by the Input Enablement option. The 96/4635/180 IPS
accepts cut sheets from the feeding device through an entry slot at
the lower right of the last feeder/stacker module.
The input enablement option provides extended paper feed
capability from third party feeder devices. Sheets are received from
a third party feeder device through an entry slot located in the last
feeder/stacker module of the system. The 96/4635/180 IPS controls
the input sheet feeding in accordance with DFA specifications.
Note: The 180 IPS has the option of a roll feeder that does not
require the Input Enablement kit and is not enabled by DFA. This
feeder is installed in the inverter feeder/stacker module in the place
of the feeder tray.
XEROX DOCUPRINT 96/4635/180 IPS SYSTEM OVERVIEW GUIDE