Stock type
Tab stock
9-inch cover stock
110 pound/200 gsm
High-speed label stock
Letterhead
Manual two-sided (duplex)
prints
Textured paper
1. You can order a mylar reinforcement tray which allows a feeder tray to handle up to 500 sheets of this type of
stock. Contact your service representative for additional information.
XEROX DOCUPRINT 96/4635/180 IPS SYSTEM OVERVIEW GUIDE
Table B-4.
Instructions for use
•
Load into trays 1 and 2 with tabs to the LEFT.
•
For best performance, print should be centered on the tab and should not
extend to either edge.
•
Use tab stock in perfectly flat condition. DO NOT use deformed, bent, or
damaged tabs.
Load into any tray.
•
Load FACE UP.
•
DO NOT run two-sided (duplex) prints.
•
Load into trays with side 1 UP and top edge toward the front of the tray
(avoid placing the print in line with the feed belt in trays 1 and 2).
•
Avoid using freshly preprinted paper.
•
Load into trays with printed side DOWN and top edge toward the front of the
tray (avoid placing the print in line with the feed belt in trays 1 and 2).
•
Print the second side as soon as possible after the first side to prevent
wrinkling and excessive curl.
Heavily textured paper may yield prints with ragged character appearance and/
or deletions. To test, print a sample sheet.
PAPER PERFORMANCE GUIDELINES
Paper stocks guide (continued)
B-5