Printer Control Console - Xerox DocuPrint 96 IPS System Overview Manual

Printer control console

XEROX DOCUPRINT 96/4635/180 IPS SYSTEM OVERVIEW GUIDE
The printer control console is the color monitor located on top of the
printer. It contains message areas and graphic displays that alert you
to paper jams and other fault conditions, such as low dry ink. The
printer control console also contains buttons that allow you to control
certain functions of the printer—such as stopping printing and
continuing an interrupted job—without returning to the Printer
Controller.
The printer control console has the following features:
•
Local controls and displays for jam clearance, paper loading/
unloading, and diagnostics/service (used by the service
representative). Two types of messages are displayed on the
printer control console: fault messages, which relate to printer
malfunctions, and information messages, which relate to printer
conditions such as low dry ink.
•
Touch-sensitive areas that allow you to select options by
touching the printer control console screen. A tone sounds
when you touch one of these areas.
•
A printer alarm which gives three beeps, repeated for ten
seconds. The alarm is generated by any event that stops the
printer.
The alarm stops after three cycles or as soon as you start to
clear the fault condition (for example, when you open printer
doors or covers specified in the clearance instructions). You can
stop the alarm by pressing one of the printer control console
buttons or by selecting a function through the touch screen.
PRINTERS
4-3