One-Touch Timer Recording (Otr); Setting The Timer Recording - Memorex MVR4042 Owner's Manual

ONE-TOUCH TIMER
RECORDING ( OTR )
The One-touch Timer Recording feature provides
a simple and convenient way to make a timed
recording.
EXAMPLE: One-touch Timer Recording for 30 minutes.
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the VCR
mode.
When a TV is connected with an audio/video cable, turn
the TV and this VCR on, and select the video input mode
on the TV.
1
Load a cassette tape with the
erase prevention tab intact.
2
Press the SPEED selector
button to select the desired
tape speed SP or SLP.
The counter and SP or SLP
will appear on the screen for
about 4 seconds.
3
Press the direct channel
selection buttons or the
CHANNEL or button to
select the channel to be
recorded.
The channel number will
appear on the screen for about
4 seconds.
4
Press the REC/OTR button to
begin recording. Press the
button again to stop recording
after 30 minutes. Each addi-
tional press of the REC/OTR
button will increase recording
time as shown in the chart
below, up to a maximum of 6
hours. The OTR and recording
time will appear on screen for
about 4 seconds.
NOTES: • Press the REC/OTR
button to increase the
time needed for
recording (See the
chart ).
• To cancel OTR, press
the STOP button or
turn off the power.
20
4F90701A/E P20-BACK
SETTING THE TIMER
RECORDING
Timer recording can be programmed on-screen with
the remote control. The built-in timer allows automatic
unattended recording of up to 8 programs within 1
month.
EXAMPLE: Program a timer recording for the 26th day,
channel 125 (CATV), 11:00 - 11:30 PM on timer
program number 1 (Tape speed: SLP).
CHECK BEFORE YOU BEGIN
• Turn on the TV and set to the video channel 3 or 4.
• Press the TV/VCR selector button to select the VCR
mode.
• Load a video cassette with the erase prevention tab
intact. The VCR will automatically turn on.
• Check that the clock and date are correct (see page 15).
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video input
mode on the TV.
1
Press the MENU button.
Check the TIMER REC SET
option is selected, then press
the ENTER button.
2
Press the TRACKING SET + or
– button to select one of the
CH 125
program line, then press the
ENTER button.
3
Press the TRACKING SET +
or – button to select the date,
then press the ENTER
button.
OTR 0 : 30
4
Set the start time, end time,
CH 125
channel and tape speed as in
step 3.
NOTE: To record from external
5
To enter other programs,
repeat steps 2 through 4. Or,
press the MENU button twice
to return to the normal screen.
6
Press the TIMER REC button.
Press Recording time
The power will go off, the
once
NORMAL REC
twice T.REC indicator will light and
0:30
the VCR stands by for
3 times 1:00
recording.
4 times 1:30
5 times 2:00
To cancel timer recording, press the button again and
6 times
3:00
the T.REC indicator will go out.
7 times 4:00
8 times 5:00
9 times 6:00
10 times NORMAL REC
20
á
á
á
source set the channel
to "L". "L" will appear
next to CH 125 (or 69).
á
á
20/03/2003, 10:32
ñ
ñ
ñ
ñ
ñ