Special Playback; Recording A Tv Program - Memorex MVR4041 Owner's Manual

SPECIAL PLAYBACK

TO VISUALLY SEARCH FOR
DESIRED POINTS
When either the F.FWD or REW button is pressed in the
PLAYBACK mode, the speed search picture will appear.
The CUE indicator or the REVEW indicator will light in
the display for about 4 seconds. When pressed twice,
the search picture will increase speed. Speed search
time depends upon the speed used (SP, LP or SLP)
during recording.
TO WATCH A STILL PICTURE
Press the PAUSE/STILL button in the PLAYBACK mode.
The STILL indicator will light in the display for about 4
seconds. Press the PAUSE/STILL button again to resume
normal playback.
FRAME BY FRAME ADVANCE
Press the SLOW button during STILL playback.
The still picture will advance by one frame each time
you press the button. Hold the button for continuous
frame by frame viewing.
Press the PAUSE/STILL button again to resume normal
playback.
NOTES: • A few noise bars will appear on the picture
during SPEED SEARCH and STILL.
• The audio output is muted during SPEED
SEARCH, STILL, FRAME ADVANCE and
SLOW MOTION.
• To prevent damage to the tape, special
playback is automatically changed to the
PLAYBACK mode after 5 minutes.
SLOW MOTION PLAYBACK
Press the SLOW button in the PLAYBACK mode.
Playback will proceed at 1/10th of the normal speed.
The SLOW indicator will light in the display for about 4
seconds. Press the PLAY button again to resume normal
playback.
NOTE: SLOW TRACKING AND VERTICAL LOCK
ADJUSTMENT
If noise bars appear in the picture during slow motion,
press the TRACKING/SET + or – button to reduce the
noise bars.
If the still picture jitters excessively, press the
TRACKING/SET + or – button to stabilize the still
picture.
18
4E40401A E P14-19
TO WATCH A TAPE REPEATEDLY
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the VCR
mode.
When a TV is connected with an audio/video cable,
turn the TV and this VCR on, and select the video input
mode on the TV.
1
Press the MENU button.
Press the TRACKING/SET +
or – button to select the AUTO
REPEAT option.
2
Press the ENTER button to
select the ON position.
3
Press the MENU button.
If you press the PLAY button, the
tape will play over and over until
the repeat mode is canceled.
"
To cancel, press the CALL button again.
NOTE: To cancel repeat mode, follow the above steps
RECORDING A TV
PROGRAM
RECORDING AND VIEWING THE
SAME TV PROGRAM
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the
VCR mode.
When a TV is connected with an audio/video cable, turn
the TV and this VCR on and select the video input mode
on the TV.
1
Load a cassette tape with the
erase prevention tab intact.
The VCR will automatically
turn on. The clock display will
change in the counter
display.
2
Press the SPEED selector
button to select the desired
tape speed SP or SLP.
The counter and SP or SLP
will appear on the screen for
about 4 seconds.
18
" will appear if you press the CALL button.
1 and 2, then press the ENTER button to select
the OFF position. Press the MENU button to
return to the TV.
4/1/01, 5:03 PM
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT
ON OFF
CH SET UP
SAP ON OFF
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
+/–/ENTER/MENU
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
SAP ON OFF
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
+/–/ENTER/MENU
00 : 00 : 00 SP