Port And System Leds; Table 1: Supported Sfp Transceivers; Figure 3: Port And System Leds - Edge-Core ECS2000-10P Installation Manual

| Introduction
C 1
HAPTER
Description of Hardware

Table 1: Supported SFP Transceivers

Media Standard Fiber Diameter (microns) Wavelength (nm) Maximum Distance
1000BASE-SX
1000BASE-LX
1000BASE-LH
100BASE-FX
1000BASE-T
* Maximum distance may vary for different SFP vendors.
P S
ORT AND YSTEM
This switch includes a display panel for key system and port indications that
simplify installation and network troubleshooting. The LEDs, which are located
on the front panel for easy viewing, are shown below and described in the
following tables.

Figure 3: Port and System LEDs

System LEDs
50/125
62.5/125
50/125
62.5/125
9/125
9/125
50/125 or 62.5/125
9/125
LED
S
850
850
1300
1300
1300
1310
1550
1300
1300
Port LEDs
– 28 –
700 m
400 m
550 m
550 m
10 km
35 km
80 km
2 km
20 km
100 m
*