Wall Mounting; Figure 16: Wall Mounting - Edge-Core ECS2000-10P Installation Manual

| Installing the Switch
C 3
HAPTER
Mounting
If installing a single switch only, turn to
3.
page 48.
If installing multiple switches, mount them in the rack, one below the other.
4.
W M
ALL OUNTING
The switch can be wall mounted by using the brackets in the bracket mounting
kit. Compared with the rack mount, the brackets must be rotated 90 degress
when attached to the switch.
Attach the brackets to the device using the screws provided in the bracket
1.
mounting kit. The bracket ears should be flat on the same plane as the
switch bottom panel.
Fasten the switch to the wall by utilizing suitable screws and if necessary,
2.
anchor plugs.

Figure 16: Wall Mounting

C
AUTION
switch.
The wall must be sufficiently strong to bear the weight of the
:
"Connecting to a Power Source" on
– 46 –