Port And System Status Leds; Table 1: Port And System Status Leds; Figure 2: Port And System Leds - Edge-Core ECS4660-28F Installation Manual

P S
ORT AND YSTEM
This switch includes a display panel for key system and port indications that
simplifies installation and network troubleshooting. The LEDs, which are located
on the front panel and the power module trays for easy viewing, are shown
below and described in the following tables.

Figure 2: Port and System LEDs

Table 1: Port and System Status LEDs

LED Condition
Crit Red
Maj Amber
Fan Red
Status Flashing Green
Green
Off
Mgmt Green
Flashing Green
Off
S LED
TATUS S
E C S 4 6 6 0 - 2 8 F
Alarm
Status
Crit Mgmt
USB
Maj
P25
Fan P26
Status
Indicates the presence within the system of one or
more critical traffic-affecting system alarms that are
not masked by the alarm filter.
Indicates the presence within the system of one or
more major traffic-affecting system alarms that are
not masked by the alarm filter.
Indicates failure of one or more fans.
System self-diagnostic test in progress.
System self-diagnostic test successfully completed.
System self-diagnostic test has detected a fault.
Port has a valid link.
Flashing indicates activity on the port.
The link is down.
– 29 –
C
HAPTER
Description of Hardware
Alarm
Cut Off
Reset
| Introduction
1