Tadiran Telecom T207 Quick Start Manual page 22

Hold
A calling party can be placed on hold while another call is made. The held party can hear one of the following: music, reorder
tone, busy tone or no sound at all as defined system-wide.
Call Hold is accessible via [Hold] or HOLD.
During a call, press [Hold] or HOLD to place the second party on hold.
The [Hold] soft key is shown with a bullet next to it, indicating that a call has been placed on hold at your station. A *HOLD*
message appears on the top line to remind you that a call is held at your station. The HOLD LED is lit and LOOP flashes.
Retrieving the call from Hold:
Press the flashing LOOP key to connect or:
1. Press [Hold] or HOLD.
2. Choose [Conn]. If more than one party has been placed on hold, scroll between names by using [Next].
3. The held calls are returned in "first in/first out order".
If you do not return to the call on hold within a predetermined amount of time, the call will automatically return to you.
If your telephone is defined (by the system administrator) as Hard HOLD, the message CALL ON HOLD appears after
placing a call on hold. When Hard Hold is activated on a call, your station will be considered busy for additional
incoming calls; however, outgoing calls can still be made.
22