Tadiran Telecom T207 Quick Start Manual page 21

Receiving Calls at a Remote Destination
If your remote destination is located outside the enterprise (PSTN or public cellular network), you can answer all your phonecalls from your remote
destination. Once you answer a call at your remote destination, your remote phone will be activated as a part of the Coral system and you have the
following options:
*1 - Place a new call –
• Listen for a dial tone indicating that you can place a call to a new contact. Your original conversing party will be disconnected.
*2 - Transfer call
• A dial tone prompts you to enter the required transfer number. Transfer can be screened or unscreened. To return to the original conversing
party (when transfer destination is busy or does not answer) dial *2 again.
*2 - Switch to Broker/Consultation/3-Way Conference call
A dial tone prompts you to enter the required third party number. Depending on your Class of Service definitions, one of the following party functions
will be activated - Broker Call, Consultation, 3-Way, or Combination of Broker/Consultation/3-Way Conference Call.
*3 - Divert call to Coral station
• A dial tone prompts you to enter a divert number. You will be disconnected and your conversing party will be transferred to the divert
number. Your number will not show on the divert party's display.
*4 - Access voice mail/IVR
• See below for more info.
*5 - Divert call to your phone
• You will be disconnected and your conversing party will be transferred to your Coral station. Your number will not show on your phone's
display. If your station does not answer within the system-defined time-out period, the call will return to your remote phone.
*6 - Call Recording/ Help Requesting
• Used to Start/Stop Recording incoming calls (requires a system-wide defined Navigator application). Or send Help request (requires a pre-
selected system-wide defined keyset station),
21