Installing The Propeller - MotorGuide Xi5 Owner's Manual

Section 5 - Maintenance and Storage
IMPORTANT: Remove the propeller nut with a wrench or a ratchet and socket. Using another tool may damage the
propeller nut or shaft. If the propeller cannot be removed easily, use a rubber mallet to lightly tap the back side of the
opposite blade. If the propeller cannot be removed, have the propeller removed by an authorized dealer.
NOTE: If the propeller pin is bent, replace the propeller pin.

Installing the Propeller

1. Rotate the motor shaft to insert the propeller pin horizontally.
a
44664
2. Install the propeller onto the motor shaft by engaging the propeller onto the propeller pin.
3. Install the washer (or anode, for saltwater models) onto the propeller shaft then install the propeller nut. Tighten the
propeller nut securely.
4. Tighten the propeller nut another ¼ turn.
Page 28
53442
a - Propeller pin
44663
44663
53442
90-8M0082949 JULY 2013
eng