The Default Dial Plan And Suggestions For Modifications - Polycom RealPresence DMA 7000 System Operation Manual

The Default Dial Plan and Suggestions for Modifications

The Polycom RealPresence DMA system is configured by default with a generic dial plan that covers many
common scenarios and may prove adequate for your needs. It's described in the following table.
Rule
1 Dial registered endpoints by alias
2 Dial by conference room ID
3 Dial by virtual entry queue ID
4 Dial to RealConnect
5 Dial services by prefix
6 Dial external networks by H.323
URL, email ID, or SIP URI
7 Dial endpoints by IP address
Polycom, Inc.
Effect
If the dial string is the alias or SIP URI of a registered endpoint, the call
is routed to that endpoint.
Otherwise, if the dial string is the dial-in number of a conference room
on the Polycom RealPresence DMA system, the call is routed to that
conference room.
Otherwise, if the dial string is the dial-in number of a virtual entry queue
on the Polycom RealPresence DMA system, the call is routed to that
VEQ.
TM conference Otherwise, if the dial string is the dial-in number of a Lync conference
on the Lync AVMCU, the call is routed to an available Polycom MCU
that supports Lync 2013 and automatically connected to the
corresponding Lync conference on the AVMCU. (If no Polycom MCUs
that support Lync 2013 are available, the conference fails to start).
Otherwise, if the dial string begins with the configured prefix of a service
(such as an MCU, ISDN gateway, SBC, neighbor gatekeeper, SIP peer
proxy, or simplified ISDN dialing service) the call is routed to that
service.
Note: For a SIP peer, the dial string must either include the protocol or
consist of only the prefix and user name (no @domain). For instance, if
the SIP peer's prefix is 123, the dial string for a call to
alice@polycom.com must be one of the following:
Otherwise, if the address is an external address, the call is routed to
that external address (H.323 and SIP calls use the designated SBC for
the originating site to reach addresses outside the enterprise network;
see Edit Site
Examples of external addresses:
Otherwise, if the address is an IP address, the call is routed to that IP
address (H.323 calls use the designated SBC for the originating site to
reach addresses outside the enterprise network).
Examples of IP addresses:
sip:123alice@polycom.com
123alice
Dialog).
H323:johnsmith@someothercompany.com
sip:johnsmith@someothercompany.com
1.2.3.4
1.2.3.4##abc
sip:abc@1.2.3.4
sip:1.2.3.4@mycompany.com
Call Server Configuration
243