Juniper Networks Src Integration; Juniper Networks Src Page - Polycom RealPresence DMA 7000 System Operation Manual

Juniper Networks SRC Integration

You can integrate the Polycom RealPresence DMA system's Call Server with a Juniper Networks SRC
Series Session and Resource Control module to provide bandwidth assurance services. This allows the
RealPresence DMA system to consult a configured policy on the Juniper SRC system at call time to assure
and/or reserve required network resources for a call. It also allows priority and preemption policies to be
applied to RealPresence DMA system calls.
In addition, the RealPresence DMA system's priority-based QoS packet marking (Gold/Silver/Bronze class
of service) is applied by the Juniper SRC system throughout the network it controls.
See also:
Integrations with Other Systems

Juniper Networks SRC Page

Juniper Networks SRC Integration Procedure
Juniper Networks SRC Integration Pane
Juniper Networks SRC Page
The following table describes the fields on the Juniper Networks SRC page.
Field
Enable integration with Juniper
Networks® SRC
IP address or host name
Server port
Client ID
Client password
Subscriber URI
See also:
Juniper Networks SRC Integration
Juniper Networks SRC Integration Pane
Polycom, Inc.
Description
Enables the SRC integration fields and the Update button, which initiates a
connection to the Juniper Networks SRC server.
The host name or IP address of the SRC server.
The port number used to connect to the SRC server.
The user ID with which the Polycom RealPresence DMA system logs into the
SRC server.
The password with which the Polycom RealPresence DMA system logs into
the SRC server.
The subscriber URI of an endpoint known to the SRC server, specified as in
this example:
ip:ipAddress=192.168.70.228
This can be any endpoint for which the SRC server will return information
when queried to test the connection.
Integrations with Other Systems
181