Regency bellavista B36XTCE Owner's Manual page 41

15) Remove Hi/Lo pressure regulator by removing 2 screws as
shown below.
Reverse steps to install LP pressure
regulator.
16) Attach the label "This unit has been converted to LPG" near or
on top of the serial # decal.
17) Replace yellow "NG" label with red "LPG" label.
18) Reverse steps 3 - 1.
19) Check for gas leaks.
20) Check inlet and outlet pressures.
21) Check operation of fl ame control.
Installer Notice:
These instructions must be left
with the appliance.
Regency B36XTCE Gas Fireplace
INSTALLATION
41