Menu Password Protection; System Reset; Restore Factory Settings; Dmx Channel Values In-Depth - Blizzard Lighting Flurry EXA User Manual

Menu Password Protection

Allows you to enable/disable the menu password protection feature.
1.) Press the <ESC> button until you reach the top menu level (and then use the
<UP/DOWN> buttons if necessary) to navigate to Menu5: PassWord, and press
the <ENTER> button.
2.) Press the <UP/DOWN> buttons to highlight PassWord Lock or PassWord
UnLock, and then press the <ENTER> button. Enter the three digit code: 988,
then press the <ENTER> button.
3.) Power off/on. You have now enabled/disabled the password protect feature.

System Reset

1.) To automatically reset the X/Y motors to automatically realign the moving
head position, press the <ESC> to reach the top menu level, and use the <UP/
DOWN> buttons navigate to Menu7: Reset, and press <ENTER>. Then simply
press <ENTER> again to confirm.

Restore Factory Settings

1.) To reset the fixture to its factory default settings, press the <ESC> to reach
the top menu level, and use the <UP/DOWN> buttons navigate to Menu6: Re-
Def-, and press <ENTER>.
DMX Values In-Depth (15-Channel Mode)
Channel
1
2
3
4
5
6
7
8
9
10
11
12
Flurry EXA™ Moving Head Wash - Rev. A
Value What It Does
000 <--> 255 Pan
000 <--> 255 Tilt
000 <--> 255 Fine Pan (16-bit)
000 <--> 255 Fine Tilt (16-bit)
000 <--> 255 Pan/Tilt Speed (Fast <--> Slow)
000 <--> 255 Dimmer (0% <--> 100%)
000 <--> 255 Red Dimmer (0% <--> 100%)
000 <--> 255 Green Dimmer (0% <--> 100%)
000 <--> 255 Blue Dimmer (0% <--> 100%)
000 <--> 255 Amber Dimmer (0% <--> 100%)
000 <--> 255 White Dimmer (0% <--> 100%)
000 <--> 255 UV Dimmer (0% <--> 100%)
Page 15
(c) 2015 Blizzard Lighting, LLC