On Consignment Of The Machine; Introductory Comment; Serial Number Plate; Technical Description - Victor MR 60B Use And Maintenance Manual

On consignment of the machine

When the machine is consigned to the customer, an
immediate check must be performed to ensure all the
material mentioned in the shipping documents has been
received, and also to check the machine has not suffered
damage during transportation. If this is the case, the carrier
must ascertain the extent of the damage at once, informing
our customer service office. It is only by prompt action of this
type that the missing material can be obtained, and
compensation for damage successfully claimed.

Introductory comment

This is a scrubbing machine that is able to clean a wide variety
of types of flooring and types of dirt by using the mechanical
action of two disc or cylindrical brushes, depending on the
model, and the chemical action of a water-detergent solution.
As it advances, it also collects the dirt removed and the
detergent solution not absorbed by the floor.
The machine must be used only for this purpose.
Even
the best machines will only work well if used correctly and
read this instruction booklet carefully and re-read it
whenever difficulties arise while using the machine. If
necessary, remember
(organised in collaboration with our dealers) is always
available for advice or direct intervention.

TECHNICAL DESCRIPTION

Working width
Squeegee width
Work capacity, up to
Disk brush
Brush rotations
Brush motor
Pressure on the brushes
Traction motor
Traction wheel
Forward speed
Maximum gradient with full load
Suction motor
Suction vacuum
Rear elastic wheels
Solution tank
Recovery tank
Steering diameter
Machine length
Machine height
Machine width (without squeegee)
Battery compartment (l x L x h)
Rated battery voltage
Battery weight (max)
Machine weight (empty and without batteries)
Machine weight in running order (machine + batteries + water + operator)
Noise level (in compliance with IEC 704/1)
Hand vibration level
Body vibration level
that our assistance

Serial number plate

service
5
UM MR 60B
mm 610
mm 780
2
m /h 3660
No. / Ø mm 1 / 610
rpm 170
V/W 24 / 450
kg 30
V/W 24 / 400
Ø mm 220
km/h 0
% 10
V/W 24 / 310
mbar 160
Ø mm 300x70
l 110
l 125
mm 1910
mm 1495
mm 1320
mm 680
mm 384x520x340
V 24
kg 136
kg 223
kg 544
dB (A)
2
m/s
2
m/s
6