Electric Fuses And Thermal Cut-Outs - Victor MR 60B Use And Maintenance Manual

ELECTRIC FUSES AND THERMAL CUT-OUTS

In addition to general 80 A fuses, the machine is also fitted with self-restoring safety
fuses located on the boards in the electric system that interrupt the power supply to the
brush and suction motors when the machine exceeds the predetermined load. To restore
the power supply to the motor, switch off the machine and wait for the fuses to
cool down (about 40 seconds). If the switch disconnects the current again, contact the
FIMAP technical assistance centre.
THE MACHINE DOES NOT REVERSE
WARNING To avoid damage to the squeegee, the reverse movement is disabled and
only works when the squeegee is lifted.
1. Check that the squeegee is lifted during the reverse movement with the left lever (1)
turned clockwise.
2. The operator must be properly seated in the driving position.
3. Check no thermal protection device has intervened.
TROUBLESHOOTING
26