Disc Brush Assembly; Solution And Recovery Tank - Victor MR 60B Use And Maintenance Manual

14. DISC BRUSH ASSEMBLY

1. Lift the base by turning the right lever (1) to move the base counterclockwise.
WARNING: During this operation, check there are no people or
objects near the brush.
2. With the base up, insert the brushes in the plate housing beneath the base, turning
them until the three pins enter the niches in the plate itself; turn the brush clockwise
until the pin is pushed towards the coupling spring and is locked into place.
WARNING: You are advised to always wear protective gloves, to
avoid the risk of serious injury to your hands.

15. SOLUTION AND RECOVERY TANK

Check correct position of the suction tube (1), that must be inserted in the fitting of the
squeegee.
Check that the knob of the cap on recovery tank drain pipe (2) on the back of the
machine is screwed on.
Check that the knob of the cap on solution tank drain pipe (3) on the left side of the
machine, is screwed on.
MACHINE PREPARATION
14