Fitting The Batteries Into The Machine; Battery And Battery Connector Connection - Victor MR 60B Use And Maintenance Manual

4. FITTING THE BATTERIES INTO THE MACHINE

The batteries must be housed in the special compartment beneath the recovery tank.
They should be handled using lifting equipment that is suitable in terms of both weight
and hook-up system. They must also satisfy the requirements of Standard CEI 21-5. The
dimensions of the battery compartment are: 384 x 520 x H340 mm.
WARNING: For battery maintenance and daily recharging, you
must fully respect the indications provided by the manufacturer or
retailer. All installation and maintenance operations must be
carried out by specialized personnel.
To insert the batteries you must:
1. Lock the machine engaging the brake lever.
2. Make sure that the recovery tank is empty.
3. Grip the handle under the seat to open the recovery tank.
4. Lift the recovery tank until it hooks to the end of the safety clamp.
5. Position the batteries.
ATTENTION: You are advised to only lift and move the batteries
with lifting and transportation means suitable for the specific
weight and size.
ATTENTION: You are advised to always wear protective gloves, to
avoid the risk of serious injury to your hands.

5. BATTERY AND BATTERY CONNECTOR CONNECTION

1. Connect the battery terminals as per the diagram shown in figure.
2. Connect the battery connector (1) to the machine connector (2).
MACHINE PREPARATION
10