Type Of Battery; Battery Maintenance And Disposal - Victor MR 60B Use And Maintenance Manual

8. TYPE OF BATTERY

To power the machine it is necessary to use:
- liquidelectrolyte lead traction batteries;
- sealed traction batteries with gas recombination or gel technology.
OTHER TYPES MUST NOT BE USED.
The batteries must meet the requisites laid out in standards CEI EN 60254-1:2005-12
(CEI 21-5) + CEI EN 60254-2:2008-06 (CEI 21-7).
The battery compartment can house up to four batteries.
For a good operating performance, we suggest the use of four 6V/210 Ah C5 batteries

9. BATTERY MAINTENANCE AND DISPOSAL

For maintenance and recharging, respect the instructions provided by the battery
manufacturer.
Particular attention must be paid when choosing the battery charger, if not supplied,
since there are different kinds according to the type and capacity of the battery.
When the battery reaches the end of its working life, it must be disconnected by expert,
trained personnel, then lifted (using the grips and suitable lifting devices) to remove it
from the battery compartment. EXHAUSTED BATTERIES ARE CLASSIFIED AS
DANGEROUS WASTE AND MUST BE CONSIGNED TO THE AUTHORISED BODIES
FOR CORRECT DISPOSAL.
WARNING: You are advised to always wear protective gloves, to
avoid the risk of serious injury to your hands.
WARNING: You are advised to only lift and move the batteries
with lifting and transportation means suitable for the specific
weight and size.
MACHINE PREPARATION
12